Cat5 Ethernet RJ45 Connector Lightning and surge protector
Model: SN-RJ45
INSTALLATION AND MAINTENANCE
a) The SPD should be connected in series between the protected device and the signal/power transmission channel.
b) The input terminal (IN) of the SPD should connect to the signal/power transmission channel, and the output terminal (OUT) of the SPD should connect to the protected device.
c) Connect earthing wire of the SPD to earthing bus-bar of the lightning protection system of the room or building.
No special duty needs to be carried out for maintenance. When problem arises and the SPD is suspected, check the system with SPD taken out of circuit. Should system recover, the SPD shall be regarded as a damaged unit and must be replaced immediately.
Our Service
Prompt response: Any inquiries will be replied within 24 hours;
Professional manufacturer;
OEM/ODM available;
Fast after-sale Service:
1). All products will be strictly Quality Checked in house before packing;
2). All products will be well packed before shipping.
3). Five years warranty ,three years replacement;.
Standard packaging, and you can also tell us your own requirements on packaging;
Company Information
Shenzhen Opplei Technologies Co.,Ltd professional designs and manufactures highly reliable, industrial grade, TVSS (transient voltage surge supressors) surge protectors that guard sensitive equipment from damage. AC Power Line, Data Line, Low Voltage SPDs,lightning rods,Varistors.
*More than 10 years experience R&D teams so easy for product customized and get a fast after sale service .
*Have certification of CE FCC RoHS ISO9001,all product in accordance with the international standard IEC IEEE ect.
We are specialized in this field for decades,welcome to visit our factory .
Main products of OPPLEI:
Ac power surge protector and DC for solar pv system protection system;
Many kinds of signal surge protector for CCTV camera and communication system;
Antenna arrester,and some others earthing system device;
FQA:
Q: Can I get some samples?
A: Yes, Sample orders welcomed.
Q: Can I use my own Logo or design on goods?
A: Yes, Customized logo and design on mass production are available.
Q:What is the delivery time?
A: 3 days for samples, 7-10 working days for mass production after payment.
Q: What is the payment term?
A: T/T, L/C at sight, West union , Paypal, etc
Q: Can I trust you?
A: Absolutely YES, We are "Made In China" verified supplier for many years.
Q: May I visit your factory?
A:Sure, welcome any time. We can also pick you up at airport or station.
Contact Information
Alisa Zhou
Tel:0086-755-23065899 Fax:0086-755-23061266
Mob.:0086-18702530822
Http://opplei-spd.en.made-in-china.com
Model: SN-RJ45
| Thank you for choosing Cat5 Surge Protector SN-RJ45. The model is designed to protect high-speed communication network from lightning over-voltage, transient over-voltage and static discharge. The protector implements multi-level protection circuit with advanced manufacturing process, and has excellent performance on discharge current, limiting voltage, response time, stability and over-all reliability. | |
| FEATURES: Multi. Protection circuits, Gas-Tube+ TVS technology Dual protection in Common module and different module TVS array technology, low capacitance Multi-Strike Capability | |
| TECHNICAL PARAMETER: | |
| Model | SN-RJ45 |
| Electrical Parameter | |
| Max. continuous operating voltage Uc | 6V |
| Nominal discharge current(8/20µs)In | 2.5kA |
| Max. discharge current (8/20µs)Imax | 5kA |
| Limiting voltage (10/700µs) Up | |
| Line-line | 25V |
| Line-ground | 500V |
| Adapt transmission rate | 100Mbps |
| Insertion loss Ae | 0.5dB |
| Protection line | 1/2 3/6 |
| Response time Ta | 1ns |
| Interface form | RJ45 |
| Mechanical characteristics | |
| Dimension | 100(L) ×37(W) ×28(H)mm |
| Weight per unit | 100g |
| IP Code | IP20 |
| Working conditions | Temperature: -40 to 80ºC, Relative humidity: ≤95% |
| Standards Compliance | CE, FCC, RoHS,ISO9001 |
INSTALLATION AND MAINTENANCE
a) The SPD should be connected in series between the protected device and the signal/power transmission channel.
b) The input terminal (IN) of the SPD should connect to the signal/power transmission channel, and the output terminal (OUT) of the SPD should connect to the protected device.
c) Connect earthing wire of the SPD to earthing bus-bar of the lightning protection system of the room or building.
No special duty needs to be carried out for maintenance. When problem arises and the SPD is suspected, check the system with SPD taken out of circuit. Should system recover, the SPD shall be regarded as a damaged unit and must be replaced immediately.
Our Service
Prompt response: Any inquiries will be replied within 24 hours;
Professional manufacturer;
OEM/ODM available;
Fast after-sale Service:
1). All products will be strictly Quality Checked in house before packing;
2). All products will be well packed before shipping.
3). Five years warranty ,three years replacement;.
Standard packaging, and you can also tell us your own requirements on packaging;
Company Information
Shenzhen Opplei Technologies Co.,Ltd professional designs and manufactures highly reliable, industrial grade, TVSS (transient voltage surge supressors) surge protectors that guard sensitive equipment from damage. AC Power Line, Data Line, Low Voltage SPDs,lightning rods,Varistors.
*More than 10 years experience R&D teams so easy for product customized and get a fast after sale service .
*Have certification of CE FCC RoHS ISO9001,all product in accordance with the international standard IEC IEEE ect.
We are specialized in this field for decades,welcome to visit our factory .
Main products of OPPLEI:
Ac power surge protector and DC for solar pv system protection system;
Many kinds of signal surge protector for CCTV camera and communication system;
Antenna arrester,and some others earthing system device;
FQA:
Q: Can I get some samples?
A: Yes, Sample orders welcomed.
Q: Can I use my own Logo or design on goods?
A: Yes, Customized logo and design on mass production are available.
Q:What is the delivery time?
A: 3 days for samples, 7-10 working days for mass production after payment.
Q: What is the payment term?
A: T/T, L/C at sight, West union , Paypal, etc
Q: Can I trust you?
A: Absolutely YES, We are "Made In China" verified supplier for many years.
Q: May I visit your factory?
A:Sure, welcome any time. We can also pick you up at airport or station.
Contact Information
Alisa Zhou
Tel:0086-755-23065899 Fax:0086-755-23061266
Mob.:0086-18702530822
Http://opplei-spd.en.made-in-china.com