UTP CAT6 cable Ethernet network cable RJ45 jumper LAN cable

UTP CAT6 cable Ethernet Network Cable RJ45 Patch Cord LAN cableCat-6: This cable is defined in TIA/EIA-568-B provides a significant improvement in performance over Cat5 and Cat 5e.During manufacture Cat 6 cables are more tightly wound than either Cat 5 or Cat 5e and they often have an outer foil or braided shielding.Th

Featured Products

UTP CAT6 Cable Ethernet Network Cable RJ45 Patch Cord LAN Cable

UTP CAT6 cable Ethernet Network Cable RJ45 Patch Cord LAN cable


Cat-6: This cable is defined in TIA/EIA-568-B provides a significant improvement in performance over Cat5 and Cat 5e.
During manufacture Cat 6 cables are more tightly wound than either Cat 5 or Cat 5e and they often have an outer foil or braided shielding.
The shielding protects the twisted pairs of wires inside the Ethernet cable, helping to prevent crosstalk and noise interference. 
Cat-6 cables can technically support speeds up to 10 Gbps, but cat6 ethernet cable can only do so for up to 55 metres. 
NOTE: 250-500Mhz/10 Gbps /100m.

Construction

Conductor:

23 AWG Solid Bare Copper/CCA

Pairs:

4 Pairs

Insulation:

1.02 mm HDPE

Insulation Colors:

Blue-White/Blue,Orange-White/Orange

Green-White/Green,Brown-White/Brown   

Filler:

Cross Filler

Rip Cord:

Cotton

Out Jacket:

6.4±0.2 mm  PVC CM

Electrical Characteristics

Impedance

1 - 250MHz 100±15 Ohms

Insulation Resistance

>5000MΩ*KM

Dielectric strength

DC  2500V  2S

Max.Conductor DC 
Resistance 20ºC

8.4 Ohms/100m

Res. unbalance (%)

Max. 2.5

Pair to Ground 
Capacitance Unbalance

330 pF/100m

Transfer Impendance

Max 10 mOhms/m  @100Mhz

Installation temp.

 -30 - 50ºC

Operation temp.

 -20 - 75ºC

 

Cross Section

UTP CAT6 Cable Ethernet Network Cable RJ45 Patch Cord LAN Cable
 

 Application

•  Meets or exceeds requirements of ANSI/TIA-568-C.2 Category 6 and 
   ISO 11801 2nd Edition Class E channel standards.

•  Meets or exceeds requirements of ANSI/TIA-568-C.2 and IEC 61156-5 
   Category 6 component standards.

•  Third party tested to comply with ANSI/TIA-568-C.2.

•  Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications.

•  Descending length cable markings enable easy identification of remaining cable 
   which reduces installation time and cable scrap.

•  Color Availability: Additional cable colors available.

 

Performance Characteristics

Frequency

RL                     (Min.)

Insertion Loss(Max.)

Propagation Delay (Max.)

Delay Skew(Max.)

NEXT (Min.)

PSNEXT (Min.)

ELNEXT (Min.)

PSELNEXT (Min.)

MHz

dB

dB/100m

ns/100m

ns/100m

dB

dB

dB/100m

dB/100m

1

20.0

2.0

570.0

45.0

74.0

72.0

67.8

64.8

4

23.0

3.8

552.0

45.0

65.0

63.0

55.7

52.7

10

25.0

6.0

545.0

45.0

59.0

57.0

47.8

44.8

16

25.0

7.6

543.0

45.0

56.0

54.0

43.7

40.7

20

25.0

8.5

542.0

45.0

55.0

53.0

41.7

38.7

31.25

23.6

10.7

540.0

45.0

52.0

50.0

37.9

34.9

62.5

21.5

15.4

539.0

45.0

47.0

45.0

31.8

28.8

100

20.1

19.8

538.0

45.0

44.3

42.3

27.8

24.8

200

18.0

29.0

537.0

45.0

39.7

37.7

21.7

18.7

250

17.3

32.8

536.0

45.0

38.0

36.0

19.8

16.8

Note: The above transmission performance tor the 100M, 20±2ºC under the conditions tested.

 

Order Informations

Marking

U/UTP CAT6 4PR 23AWG PVC  XXX (or Per customer's request)

Inner Package

305m/Spool,305m/Reel (or Per customer's request)

Outer Package

Color Box, Pallet (or Per customer's request)

Delivery time

Normally 25 days after received the deposit.


UTP CAT6 Cable Ethernet Network Cable RJ45 Patch Cord LAN Cable
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours